Products

Playgreen 6

Central module PG6UV

With the patented technology of double pass through the reverse osmosis membrane.

Attention! Requires an external micro-carbon filter MCF75.

Key Features:

  • Rated capacity: 1.6 GPH ( 6 LPH )
  • Maximum capacity: 2.4 GPH ( 9 LPH )
  • Number of high-pressure circuits: 2
  • Output pressure: 1000 psi ( 70 bar )
  • Power consumption: 200 W
  • Voltage: 20 VDC + 40 VDC
  • Housing and inner mechanical parts material: high quality aluminum
  • Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )

Advantages:

  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
  • Internal hydraulic valves - no source of noise in the room
  • High degree of demineralization - up to 97%
  • Microbiological safety - eliminates viruses, bacteria, fungi
  • Completely automatic operation
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
  • Continuous UV water sterilization

 

External micro-carbon filter MCF75

Necessary for PG6UV

Key Features:

  • Chlorine capacity: 20,000 gal ( 75,000 l )
  • Micro-carbon filter class: 5 μm
  • Dimensions without bracket and fittings,
    height x diameter, in (mm) : 12 x 4.5 (300 х 115 )
  • Connection: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8

Advantages:

  • Microfiltration function
  • Very high capacity for chlorine
  • Easy replacement of filter element

 

Passive nozzle PN1SS

Key Features:

  • Capacity: 0.3 GPH ( 1.2 LPH )
  • Built-in stainless steel filter 40 μm
  • Atomizing hole diameter: 85 μm
  • Droplet size: 10 - 30 μm
  • Anti-drip valve
  • Fogging head size, diameter x length, in (mm): 0.47 x 1.18 ( 12 x 30 )
  • Material: body - stainless steel, fogging insert - ruby

Advantages:

  • Silent operation
  • Anti-drip valve
  • High contaminant capacity filter
  • Long life because of ruby insert
  • Less visible installation due to the built-in construction

 

Passive nozzle PN1.2SS

Key Features:

  • Capacity: 0.6 GPH ( 2.4 LPH )
  • Built-in stainless steel filter 40 μm
  • Atomizing hole diameter: 85 μm
  • Droplet size: 10 - 30 μm
  • Anti-drip valve
  • Each fogging head size, diameter x length, in (mm): 0.47 x 1.18 ( 12 x 30 )
  • Material: body - stainless steel, fogging insert - ruby

Advantages:

  • Silent operation
  • Anti-drip valve
  • High contaminant capacity filter
  • Long life because of ruby insert
  • Less visible installation due to the built-in construction

 

Passive nozzle PN3SS

Key Features:

  • Capacity: 0.9 GPH ( 3.5 LPH )
  • Built-in stainless steel filter 40 μm
  • Atomizing hole diameter: 200 μm
  • Droplet size: 15 - 40 μm
  • Anti-drip valve
  • Fogging head size, diameter x length, in (mm): 0.47 x 1.18 ( 12 x 30 )
  • Material: body - stainless steel, fogging insert - ruby

Advantages:

  • Silent operation
  • Anti-drip valve
  • High contaminant capacity filter
  • Long life because of ruby insert
  • Less visible installation due to the built-in construction

 

Control panel HS1

Key Features:

  • Number of separately controlled zones of humidification: 1
  • Control range of RH: 5 - 95%
  • Accuracy of RH regulation: ± 3% ( 20-90% range )
  • Supply voltage: 20 VDC ( powered by PG6UV )
  • Housing material: high-quality matted plastic
  • Color: white, RAL 9010
  • Dimensions WxDxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )

Advantages:

  • Electronic circuit maintains the required relative humidity with high accuracy
  • LCD display for control of the set and current relative humidity
  • On-wall installation
  • Modern look

 

Maximum humidistat MHS1

Optional for HS1

Key Features:

  • Protection threshold setting: 25 - 95%
  • Protection threshold accuracy: ± 5%
  • Housing material: high-quality matted plastic
  • Color: white, RAL 9010
  • Dimensions WxDxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )

Advantages:

  • Mechanical design, requiring no power
  • On-wall installation
  • Modern look

 

Deep purification module DPM6 NEW

Optional for PG6UV

Key Features:

  • Rated capacity: 1.6 GPH ( 6 LPH )
  • Maximum capacity: 2.4 GPH ( 9 LPH )
  • Maximum water purity at the outlet: 2 μS/cm
  • Capacity (with the incoming water is 25 μS/cm): 3,300 gal ( 12,500 l )
  • Housing material: special fiberglass
  • Dimensions WxDxH, in (mm): 8 x 7 x 18 ( 200 x 170 x 460 )

Advantages:

  • Silent operation, the device is suitable for mounting near living areas
  • Adjustable degree of purification - up to 2 μS/cm
  • High ion exchange resin capacity

 

Ultradeep purification module DPM Blue

Optional for PG6UV

Key Features:

  • Rated capacity: 3.2 GPH ( 12 LPH )
  • Maximum capacity: 4.4 GPH ( 17 LPH )
  • Maximum water purity at the outlet: 0.1 μS/cm
  • Capacity (with the incoming water is 25 μS/cm): 7,400 gal ( 28,000 l )
  • Power consumption: 10 W
  • Voltage: 18 VAC
  • Housing and mechanical parts material: high quality aluminum
  • Dimensions WxDxH, in (mm): 16 x 17 x 29 ( 405 x 425 x 740 )

Advantages:

  • Highest degree of purification - up to 0.1 μS/cm
  • Built-in purity water analyzer, inlet and outlet
  • Visual monitoring of ion exchange resin
  • Silent operation, the device is suitable for mounting near living areas
  • Removing air bubbles
  • Completely automatic operation
  • Leakage control
  • Easy CO2 cylinder replacement
  • High ion exchange resin and CO2 cylinder capacity

 

Additional microfilter MF2

Optional in case of high level of water contaminants

Key Features:

  • Microfilter class: 1 μm
  • Dimensions of microfilter without bracket and fittings, height x diameter, in (mm) : 22 x 4.5 ( 560 x 115 )
  • Connections: inlet JG 3/8", outlet JG 3/8"

Advantages:

  • Microfiltration function
  • Easy replacement of filter element
  • Removes suspended particles

 

Reinforced high-pressure hose HPH04-PTFE STEEL THERMO, m

Key Features:

  • Maximum operating pressure: 4000 psi ( 275 bar )
  • Burst pressure: 13800 psi (950 bar)
  • Conditional pass diameter: 532 in ( 4 mm )
  • Outer diameter: 7.2 mm
  • Minimum bending radius: 1.6 in ( 40 mm )
  • Temperature range: +33 °F ... +500 °F ( +0 °C ... +260 °C )
  • Inner layer: PTFE
  • Outer reinforcing layer: high quality stainless steel

Advantages:

  • Chemically inert and low adhesion inner layer does not accumulate biofilms
  • Flexible and very elastic design simplifies installation, high resistance to mechanical damage
  • Large safety margin for maximum pressure
  • Small outer diameter for easy installation

 

  © 2012 - 2019 Buhler-AHS Inc. All rights reserved.