Products

Manitoba 12

Central module M12UV

With the patented technology of double pass through the reverse osmosis membrane.

Attention! Requires an external micro-carbon filter MCF170 or FS1

Key Features:

  • Rated capacity: 3.2 GPH ( 12 LPH )
  • Maximum capacity: 4.4 GPH ( 17 LPH )
  • Number of high-pressure circuits: 1
  • Output pressure: 1000 psi ( 70 bar )
  • Power consumption: 180 W
  • Voltage: 20 VDC + 40 VDC
  • Housing and inner mechanical parts material: high quality aluminum
  • Dimensions WxDxH, in (mm): 24 x 16 x 13 ( 600 x 400 x 330 )

Advantages:

  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
  • High degree of demineralization - up to 97%
  • Microbiological safety - eliminates viruses, bacteria, fungi
  • Completely automatic functioning
  • Leakage control inside the case and on high pressure line
  • Automatic antiscale function
  • Continuous UV water sterilization

 

Softener module SM1

Attention! Requires filters installation set FS1

Key Features:

  • Maximum clean water capacity: 9.6 GPH ( 36 LPH )
  • Salt capacity: 55 lbs ( 25 kg )
  • Inlet pressure: 30 - 90 psi ( 2 - 6 bar )
  • Dimensions WxDxH, in (mm): 14 x 24 x 27 ( 350 x 600 x 680 )
  • Power consumption: 6 W
  • Inner tank material: fiberglass
  • Housing material: high-quality plastic
  • Connection: G 1/2" ( 1/2" BSPP )

Advantages:

  • Automatic regeneration (requires periodic top ups of salt)
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
  • Operation ready connector for output to M12UV
  • Equipped with an electronic control module
  • Fully automatic operation
  • Cabinet construction - no extra salt tank
  • Connects to M12UV inlet for water hardness up to 250 ppm

 

Softener module SM2

Attention! Requires filters installation set FS1

Key Features:

  • Maximum clean water capacity: 19.2 GPH ( 72 LPH )
  • Salt capacity: 110 lbs ( 50 kg )
  • Inlet pressure: 30 - 90 psi ( 2 - 6 bar )
  • Dimensions WxDxH, in (mm): 14 x 24 x 43 ( 350 x 600 x 1080 )
  • Power consumption: 6 W
  • Inner tank material: fiberglass
  • Housing material: high-quality plastic
  • Connection: G 1/2" ( 1/2" BSPP )

Advantages:

  • Automatic regeneration (requires periodic top ups of salt)
  • Very low power consumption
  • Silent operation, the device is suitable for mounting near living areas
  • Operation ready connector for output to M12UV
  • Equipped with an electronic control module
  • Fully automatic operation
  • Cabinet construction - no extra salt tank
  • Connects to M12UV inlet for water hardness up to 500 ppm

 

Filter installation set FS1

Required for SM1/SM2, optional instead of MCF170

Key Features:

  • Chlorine capacity: 45,000 gal ( 170,000 l )
  • Micro-carbon filter class: 10 μm
  • Microfilter class: 1 μm
  • Dimensions of micro-carbon filter without bracket and fittings,
    height x diameter, in (mm) : 22 x 4.5 ( 560 x 115 )
  • Dimensions of microfilter without bracket and fittings,
    height x diameter, in (mm): 12 x 4.5 ( 300 х 115 )
  • Connections: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8

Advantages:

  • Microfiltration function
  • Very high capacity for chlorine
  • Easy replacement of filter elements
  • Pressure gauge allow to monitor filters

 

External micro-carbon filter MCF170

Necessary if NOT using FS1

Key Features:

  • Chlorine capacity: 45,000 gal ( 170,000 l )
  • Micro-carbon filter class: 10 μm
  • Dimensions without bracket and fittings,
    height x diameter, in (mm) : 22 x 4.5 ( 560 x 115 )
  • Connection: inlet G 1/2" ( 1/2" BSPP ), outlet JG 3/8

Advantages:

  • Microfiltration function
  • Very high capacity for chlorine
  • Easy replacement of filter element

 

Active nozzle AN1

Key Features:

  • Capacity: 0.3 GPH ( 1.2 LPH )
  • Built-in stainless steel filter 40 μm
  • Atomizing hole diameter: 85 μm
  • Droplet size: 10 - 30 μm
  • Anti-drip valve
  • Control voltage: 18 - 24 VDC
  • Fogging head size, diameter x length, in (mm): 0.47 x 1.18 ( 12 x 30 )
  • Material: body - stainless steel, fogging insert - ruby

Advantages:

  • Silent operation
  • Anti-drip valve
  • High contaminant capacity filter
  • Long life because of ruby insert
  • Less visible installation due to the built-in construction

 

Active nozzle AN1.2

Key Features:

  • Capacity: 0.6 GPH ( 2.4 LPH )
  • Built-in stainless steel filter 40 μm
  • Atomizing hole diameter: 85 μm
  • Droplet size: 10 - 30 μm
  • Anti-drip valve
  • Control voltage: 18 - 24 VDC
  • Each fogging head size, diameter x length, in (mm): 0.47 x 1.18 ( 12 x 30 )
  • Material: body - stainless steel, fogging insert - ruby

Advantages:

  • Silent operation
  • Anti-drip valve
  • High contaminant capacity filter
  • Long life because of ruby insert
  • Less visible installation due to the built-in construction

 

Active nozzle AN3

Key Features:

  • Capacity: 0.9 GPH ( 3.5 LPH )
  • Built-in stainless steel filter 40 μm
  • Atomizing hole diameter: 200 μm
  • Droplet size: 15 - 40 μm
  • Anti-drip valve
  • Control voltage: 18 - 24 VDC
  • Fogging head size, diameter x length, in (mm): 0.47 x 1.18 ( 12 x 30 )
  • Material: body - stainless steel, fogging insert - ruby

Advantages:

  • Silent operation
  • Anti-drip valve
  • High contaminant capacity filter
  • Long life because of ruby insert
  • Less visible installation due to the built-in construction

 

Control panel HS1

Key Features:

  • Number of separately controlled zones of humidification: 1
  • Control range of RH: 5 - 95%
  • Accuracy of RH regulation: ± 3% ( 20-90% range )
  • Supply voltage: 20 VDC ( powered by MZC10 )
  • Housing material: high-quality matted plastic
  • Color: white, RAL 9010
  • Dimensions WxDxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )

Advantages:

  • Electronic circuit maintains the required relative humidity with high accuracy
  • LCD display for control of the set and current relative humidity
  • On-wall installation
  • Modern look

 

Maximum humidistat MHS1

Optional for HS1

Key Features:

  • Protection threshold setting: 25 - 95%
  • Protection threshold accuracy: ± 5%
  • Housing material: high-quality matted plastic
  • Color: white, RAL 9010
  • Dimensions WxDxH, in (mm): 4.2 x 3.9 x 1.3 ( 106 x 98 x 34 )

Advantages:

  • Mechanical design, requiring no power
  • On-wall installation
  • Modern look

 

Deep purification module DPM12 NEW

Optional for M12UV

Key Features:

  • Rated capacity: 3.2 GPH ( 12 LPH )
  • Maximum capacity: 4.4 GPH ( 17 LPH )
  • Maximum water purity at the outlet: 2 μS/cm
  • Capacity (with the incoming water is 25 μS/cm): 7,400 gal ( 28,000 l )
  • Power: AAA batteries 2 pcs
  • Housing material: special fiberglass
  • Dimensions WxDxH, in (mm): 12 x 9 x 22 ( 300 x 220 x 550 )

Advantages:

  • Silent operation, the device is suitable for mounting near living areas
  • Adjustable degree of purification - up to 2 μS/cm
  • High ion exchange resin capacity

 

Ultradeep purification module DPM Blue

Optional for M12UV

Key Features:

  • Rated capacity: 3.2 GPH ( 12 LPH )
  • Maximum capacity: 4.4 GPH ( 17 LPH )
  • Maximum water purity at the outlet: 0.1 μS/cm
  • Capacity (with the incoming water is 25 μS/cm): 7,400 gal ( 28,000 l )
  • Power consumption: 10 W
  • Voltage: 18 VAC
  • Housing and mechanical parts material: high quality aluminum
  • Dimensions WxDxH, in (mm): 16 x 17 x 29 ( 405 x 425 x 740 )

Advantages:

  • Highest degree of purification - up to 0.1 μS/cm
  • Built-in purity water analyzer, inlet and outlet
  • Visual monitoring of ion exchange resin
  • Silent operation, the device is suitable for mounting near living areas
  • Removing air bubbles
  • Completely automatic operation
  • Leakage control
  • Easy CO2 cylinder replacement
  • High ion exchange resin and CO2 cylinder capacity

 

Additional microfilter MF2

Optional in case of high level of water contaminants

Key Features:

  • Microfilter class: 1 μm
  • Dimensions of microfilter without bracket and fittings, height x diameter, in (mm) : 22 x 4.5 ( 560 x 115 )
  • Connections: inlet JG 3/8", outlet JG 3/8"

Advantages:

  • Microfiltration function
  • Easy replacement of filter element
  • Removes suspended particles

 

Multi-zone controller MZC10

Key Features:

  • Number of separately controlled zones of humidification: 10
  • Supply voltage for the nozzles and control panels: 20 VDC
  • Power consumption: 110 W
  • Voltage: 20 VDC
  • Housing material: high-quality plastic
  • Dimensions WxDxH, in (mm): 14 x 6 x 7.8 ( 360 x 150 x 200 )
  • Color: light gray

Advantages:

  • Sound malfunction alarm
  • Provides power for control panels and nozzles
  • Provides nozzles operating modes
  • Allows you to set the priority of the nozzles
  • Provides a link to BMS (alarm output)
  • Waterproof design

 

Reinforced high-pressure hose HPH04-PTFE STEEL THERMO, m

Key Features:

  • Maximum operating pressure: 4000 psi ( 275 bar )
  • Burst pressure: 13800 psi (950 bar)
  • Conditional pass diameter: 532 in ( 4 mm )
  • Outer diameter: 7.2 mm
  • Minimum bending radius: 1.6 in ( 40 mm )
  • Temperature range: +33 °F ... +500 °F ( +0 °C ... +260 °C )
  • Inner layer: PTFE
  • Outer reinforcing layer: high quality stainless steel

Advantages:

  • Chemically inert and low adhesion inner layer does not accumulate biofilms
  • Flexible and very elastic design simplifies installation, high resistance to mechanical damage
  • Large safety margin for maximum pressure
  • Small outer diameter for easy installation

 

  © 2012 - 2019 Buhler-AHS Inc. All rights reserved.